Over 1 Million Paying Vacancies Available. Discover Your Dream Vacancy with Us!

Are you looking for a SAFETY AND OCCUPATIONAL HEALTH SPECIALIST? We suggest you consider a direct vacancy at U.S. Army Corps of Engineers in Napoleon. The page displays the terms, salary level, and employer contacts U.S. Army Corps of Engineers person

Job opening: SAFETY AND OCCUPATIONAL HEALTH SPECIALIST

Salary: $60 905 - 95 794 per year
City: Napoleon
Published at: May 02 2024
Employment Type: Full-time
About the Position: Position is responsible for the planning and management of a comprehensive safety occupational health program to eliminate or control the risk of injury to personnel assigned to all phases of the safety and occupational health activities.

Duties

Interprets regulations, provides advice, and prepares written procedures for implementation of accident prevention program including mishap prevention and safe materials handling practices. Inspects work sites, evaluates hazards present, and implements changes to mitigate or reduce likelihood of personnel injury or damage to equipment. Develops, reviews and analyzes statistical data of accidents and injuries to determine trends. Identifies unhealthy conditions, unsafe noise levels, problems where respiratory equipment would be required and potential problems with hazardous and environmental exposures. Carries out safety education activities including accident prevention and good industrial hygiene practices; promotes safety through posters, displays of safety equipment; participates in community and regional safety planning conferences. Develops and provides technical safety training to supervisors and employees.

Requirements

  • Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
  • Must be able to obtain and maintain a valid state issued drivers license.
  • Must be able to operate a motor vehicle for long periods, potentially over uneven terrain.
  • May be required to carry equipment/supplies up to 50 lbs.

Qualifications

Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities. Current Department of Army Civilian EmployeesCurrent Department of Defense (DOD) Civilian Employee (non-Army)Domestic Defense Industrial Base/Major Range and Test Facilities Base Civilian Personnel WorkforceInteragency Career Transition Assistance PlanLand Management Workforce Flexibility ActMilitary Spouses, under Executive Order (E.O.) 13473Non-Department of Defense (DoD) TransferOffice of Personnel Management (OPM) Interchange Agreement EligiblePriority Placement Program, DoD Military Reserve (MR) and National Guard (NG) Technician EligiblePriority Placement Program, DoD Military Spouse Preference (MSP) EligiblePriority Placement Program, DoD MR and NG Preference Eligible Tech Receiving Disability RetirementPriority Placement Program, DoD Retained Grade Preference EligibleReinstatementVeterans Employment Opportunity Act (VEOA) of 1998 In order to qualify, you must meet the education and/or experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. GS-09 Specialized Experience: One year of specialized experience which includes 1) Conducting inspections to ensure compliance with safety and occupational health laws and regulations. AND 2) Preparing reports of findings on unhealthy conditions AND/OR hazardous operations and conditions. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-07). OR Education: Master's or equivalent graduate degree or 2 full years of progressively higher level graduate education leading to such a degree with a major study in safety or occupational health fields (safety, occupational health, industrial hygiene), or master's or equivalent graduate degree in other related fields that included or was supplemented by at least 24 semester hours of study from among the following (or closely related) disciplines: safety, occupational health, industrial hygiene, occupational medicine, toxicology, public health, mathematics, physics, chemistry, biological sciences, engineering, and industrial psychology. OR Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the first year (total graduate semester hours minus 18) by 18. Add the two percentages. GS-11 Specialized Experience: One year of specialized experience which includes 1) Conducting inspections to ensure compliance with safety and occupational health laws and regulations. AND 2) Preparing reports of findings on unhealthy conditions AND/OR hazardous operations and conditions. AND 3) Developing and conducting safety and occupational health training. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-09). OR Education: Ph.D or equivalent doctoral degree or 3 full years of progressively higher level graduate education leading to such a degree with a major study in safety or occupational health fields (safety, occupational health, industrial hygiene), or Ph.D or equivalent doctoral degree in other related fields that included or was supplemented by at least 24 semester hours of study from among the following (or closely related) disciplines: safety, occupational health, industrial hygiene, occupational medicine, toxicology, public health, mathematics, physics, chemistry, biological sciences, engineering, and industrial psychology. OR Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the second year (total graduate semester hours minus 36) by 18. Add the two percentages. You will be evaluated on the basis of your level of competency in the following areas: ComplianceSafety and Health Training and EducationSafety and Occupational Health (SOH) Hazard Identification Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-07 for GS-09 level; GS-09 for GS-11 level).

Education

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/.

Contacts

  • Address RH-W2SJ06 US ARMY ENGINEER DISTRICT-KANSAS CITY DO NOT MAIL Kansas City, MO 64106 US
  • Name: Army Applicant Help Desk

Map