Over 1 Million Paying Vacancies Available. Discover Your Dream Vacancy with Us!

Are you looking for a ELECTRONIC INTEGRATED SYSTEMS MECHANIC (TITLE 32)? We suggest you consider a direct vacancy at Army National Guard Units in Jackson. The page displays the terms, salary level, and employer contacts Army National Guard Units person

Job opening: ELECTRONIC INTEGRATED SYSTEMS MECHANIC (TITLE 32)

Salary: $31 - 36 per hour
City: Jackson
Published at: Feb 12 2024
Employment Type: Full-time
THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION. This National Guard position is for a ELECTRONIC INTEGRATED SYSTEMS MECHANIC (TITLE 32), Position Description Number NGD0872P01 and is part of the TN ARMY Army National Guard. This vacancy is covered by Association of Civilian Technicians (ACT), Chapter 110.

Duties

As an ELECTRONICS INTEGRATED SYSTEMS MECHANIC, WG2610-12, you will perform operational checks, inspections, tests and troubleshooting on electronic integrated systems composed of a number of sensor subsystems: Integrated Vehicle Health Management System (IVHMS), the Common Missile Warning System (CMWS), the Improved Countermeasure Dispenser System (ICMD), the Night Vision Goggle System (NVG), the Air Data Subsystem, the Attitude Heading Reference System (AHRS) and Doppler/GPS Navigation System (DGNS), Command Instrument Set (CIS) ; a logic subsystem-- the Multiplex Data Bus System (MUX), the Multiplex Remote Terminal Units (MRTU), Data Link Terminal Units (DLTU), and Digital Automatic Flight Control System (DAFCS); and actuating subsystems--, and the Digital Automatic Stabilization System (DASS), which includes the Stability Augmentation System (SAS) and Command Augmentation System (CAS) and Hover Augmentation System (HAS). Complete operational checks, inspections, tests and troubleshooting of Line Replaceable Units (LRU). Isolates unusual malfunctions using technical manuals, schematics, and wiring diagrams, tools and test equipment including automatic test equipment. Complete bench check, testing, repair, inspection, modification, programming, reprogramming, mating, adjusting, alignment, and analyzing of LRUs and shop replaceable units. Recommend methods to improve equipment performance, technical data, and maintenance procedures by reporting hardware and software malfunctions, initiates material deficiency reports both on equipment and in technical data and assists in design changes as necessary. When designated on NGB Flying Status Orders, serves as member of flight crew for the purpose of diagnosing and recording malfunctions, or otherwise determining maintenance and repair requirements. Guide lower-level mechanics in the performance of duties. Process and account for due-in supply assets. Prepare for and participate in various types of readiness evaluations such as Operational Readiness Evaluations (ORE), Command Logistics Readiness Inspections (CLRT-X), and Aviation Resource Management Surveys. Perform other duties as assigned.

Requirements

  • NATIONAL GUARD MEMBERSHIP IS REQUIRED. If you are not sure you are eligible for military membership, please contact a National Guard recruiter prior to applying for this position.
  • This is an excepted service position that requires membership in a compatible military assignment in the employing state's National Guard, required prior to the effective date of placement.
  • Selectee will be required to wear the military uniform.
  • Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment.
  • Applicants who are not currently a member of the National Guard must be eligible for immediate membership and employment in the National Guard in the military grade listed in this announcement.
  • Males born after 31 December 1959 must be registered for Selective Service.
  • Federal employment suitability as determined by a background investigation.
  • May be required to successfully complete a probationary period.
  • Participation in direct deposit is mandatory.
  • Preplacement Medical Requirements: Selectee will be required to undergo medical testing, at the expense of the government, prior to beginning employment. Medical tests are used to determine fitness and eligibility for employment.
  • Acceptance of a Federal position may terminate Tricare Reserve Select eligibility.
  • For positions requiring a security clearance (Secret or Top Secret) the applicant must possess or be able to obtain a clearance within one year of appointment.
  • Must have the physical capability to stand, climb, walk, bend, crouch, reach, and stoop over extended periods of time.
  • Must possess a valid state driver’s license to operate government motor vehicles, for the state in which he or she lives or is principally employed, in accordance with U.S. Army and Army National Guard Vehicle Operations Direct.
  • U.S. Army military medical record must indicate a completed and current medical physical, medical profile, a cleared drug test; and, normal color vision as defined by Army Medical Examinations and Stand.
  • Must complete the U.S. Army Hazmat Certification within six months of employment and complete the required hazmat recertification every two years.
  • Must have the capability to lift, carry, push, or otherwise handle items weighing up to 70 pounds.

Qualifications

Military Grades: E-5 through E-8 GENERAL EXPERIENCE: Must have a validated understanding of the basic principles and concepts of the occupational series and grade. SPECIALIZED EXPERIENCE: Must have at least 24 months of skill, knowledge, and abilities of the FWS 2610 work at the Electronics Branch of an Army Aviation Support Facility (AASF), Army Aviation Flight Activity (AAFA), or Theatre Aviation Sustainment Maintenance Group (TASMG). Must have competencies in performing electronic integrated systems work activities on Army National Guard helicopters such as, installing, troubleshooting, repairing, modifying, calibrating, aligning, and maintaining these systems. Skilled in performing operational checks, inspections, tests, and troubleshooting on electronic integrated systems composed of a number of sensor subsystems: Integrated Vehicle Health Management System (IVHMS), the Common Missile Warning System (CMWS), the Improved Countermeasure Dispenser System (ICMD), the Night Vision Goggle System (NVG), the ARNG Data Subsystem, the Attitude Heading Reference System (AHRS) and Doppler/GPS Navigation System (DGNS), Command Instrument Set (CIS); a logic subsystem-- Multiplex Data Bus System (MUX), the Multiplex Remote Terminal Units (MRTU), Data Link Terminal Units (DLTU), and Digital Automatic Flight Control System (DAFCS); and actuating subsystems--Digital Automatic Stabilization System (DASS), which includes the Stability Augmentation System (SAS) and Command Augmentation System (CAS) and Hover Augmentation System (HAS). Skilled in conducting operational checks, inspections, tests and troubleshooting of Line Replaceable Units (LRU). Experienced in isolating unusual malfunctions using technical manuals, schematics, and wiring diagrams, tools and test equipment including automatic test equipment. Competent in identifying and solving problems system concerns by analyzing installation, circuitry, and operating characteristics of these systems. Skilled in adjusting and aligning sensors, transmitters, amplifiers, power supplies, display devices, controls, actuators, servos, computers, and other related components. Have technical expertise in removing faulty LRUs for shop repair. Skilled and knowledgeable in the installation of serviceable components into the aircraft and in performing total systems alignments, in accordance with existing technical manuals and directives. Accomplished in following technical manual compliance and modification of components and systems; and, and skilled in completing systems checks for proper operations. Skilled in maintaining, modifying, calibrating, and inspecting a wide variety of user tests, measurements, and diagnostic equipment (TMDE). Skilled in completing bench checks, testing, repairs, inspections, modifications, programming, reprogramming, mating, adjusting, alignments, and analyzing of LRUs and shop replaceable units. Experienced in using a variety of test equipment such as, automatic test equipment (ATE), oscilloscopes, DTA computer, multi-meters, power-meters, and special purpose bench test sets. Competent to test and troubleshoot solid state electronic assemblies and subassemblies such as, circuit cards, modules, rate gyros, electronic control amplifiers, electro-mechanical assemblies, random access memories, programmable read-only memories and various integrated circuits. Capable to certify the operational integrity of various night vision systems, and electro-optical components. Skilled in recognizing methods to improve equipment performance, technical data, and maintenance procedures by reporting hardware and software malfunctions, initiates material deficiency reports both on equipment and in technical data. Experienced in debriefing aircrews to determine the nature of system malfunctions, then documents all maintenance performed and records information related to the system, LRU's, or shop repairable units on both aircraft and historical records. Should have experiences as a flight crew member for the purpose of diagnosing and recording malfunctions, or otherwise determining maintenance and repair requirements. Experienced in providing instructional training to other mechanics in regard to the repair of computer controlled automatic test equipment, line replaceable units and aircraft integrated systems. Experiences included participation in various types of readiness evaluations such as, Operational Readiness Evaluations (ORE), Command Logistics Readiness Inspections (CLRT-X), and Aviation Resource Management Surveys. May have experiences in performing additional duties such as, structural firefighting, aircraft handling, heavy equipment operation, and maintenance of facilities and equipment, or served as a member of a team to cope with natural disasters or civil emergencies. Knowledgeable in safety, fire, security, and housekeeping regulations.

Education

Education Requirement: Must have a High School Diploma or GED equivalent.

Contacts

  • Address TN ARMY 3041 Sidco Dr Nashville, TN 37204 US
  • Name: MINNIE RANDOLPH
  • Phone: 615-313-3031
  • Email: [email protected]

Map

Similar vacancies

ELECTRONIC INTEGRATED SYSTEMS MECHANIC (TITLE 32) May 23 2024
$33 - 38

As an ELECTRONICS INTEGRATED SYSTEMS MECHANIC, WG2610-12, you will perform operational checks, inspections, tests and troubleshooting on electronic integrated systems composed of a number of sensor su...

ELECTRONIC INTEGRATED SYSTEMS MECHANIC (MILITARY) Mar 11 2024
$31 - 36

As an ELECTRONICS INTEGRATED SYSTEMS MECHANIC, WG2610-12, you will perform operational checks, inspections, tests and troubleshooting on electronic integrated systems composed of a number of sensor su...

ELECTRONIC INTEGRATED SYSTEMS MECHANIC (TITLE 32) Jan 04 2024
$31 - 36

As an ELECTRONICS INTEGRATED SYSTEMS MECHANIC, WG2610-12, you will perform operational checks, inspections, tests and troubleshooting on electronic integrated systems composed of a number of sensor su...