THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION. This National Guard position is for a ELECTRONIC MEASUREMENT EQUIPMENT MECHANIC, Position Description Number D1201000 and is part of the HI CSMS 1, National Guard. LOCATION: Combined Support Maintenance Shop No. 1, Hawaii Army National Guard, Kapolei, Hawaii

Duties

SUMMARY OF DUTIES: The primary purpose of this position is to perform calibration, diagnostics repair, and certification of electronic, mechanical, and radiation Test Measurement and Diagnostic Equipment (TMDE). Calibrates and repairs TMDE within support capability and authority including various levels of calibration as designated in technical bulletins, manuals, etc. Sets up system test sets and various types of test equipment such as frequency meters, standing wave ratio meters, radio frequency (RF) power meters, function/ arbitrary waveform generator, distortion analyzers, time frequency work stations, oscillators, voltmeters, electronic counters, oscilloscopes, attenuators, decade resistors and capacitors, signal generators, stroboscope, tachometers, pneumatic and hydraulic pressure standards and other physical and electronic tests. Following repair, tests by applying signals in known amplitude and wave shape into oscilloscopes to observe wave pattern. Determines purpose in operation characteristics of each major section. Completes necessary Army Maintenance Management System (TAMMS), calibration, radiation reports and other records and forms on work completed. Ensures maximum number of weapons systems are operationally ready. Follows appropriate safety procedures, with special care being exercised while calibrating high voltage, radio frequency, radioactive sources and high-pressure instruments and gages. Performs other duties as assigned. Details of the duties and responsibilities are contained in the applicable position description (D1201000).

Requirements

• NATIONAL GUARD MEMBERSHIP IS REQUIRED. If you are not sure you are eligible for military membership, please contact a National Guard recruiter prior to applying for this position.
• This is an excepted service position that requires membership in a compatible military assignment in the employing state's National Guard, required prior to the effective date of placement.
• Selectee will be required to wear the military uniform.
• Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment.
• Males born after 31 December 1959 must be registered for Selective Service.
• Federal employment suitability as determined by a background investigation.
• May be required to successfully complete a probationary period.
• Participation in direct deposit is mandatory.

Qualifications

If your resume does not include a narrative description of how you meet the GENERAL, SPECIALIZED experiences, and OTHER requirements, you may lose consideration for this position. Ensure that the Questionnaire is completed on Application Manager. GENERAL EXPERIENCE: Experience or training which demonstrates a working knowledge of electronic principles involved in the generation and measurement of such elements as voltage, current, impedance, capacitance, frequency, and inductance. Experience in the use of various precision measurement instruments and standards. SPECIALIZED EXPERIENCE: Must have at least 18 months of experience or training with basic application of operating principles such as the production and utilization of oscillations over a broad range of frequencies; signal and waveform behavior, distortion, and amplification; pulse, trigger, and synchronization techniques; digital/analog processing and data conversion techniques; and a variety of display and indication methods. Experience in tracing signals and voltage paths, and skilled in the analysis of waveform characteristics such as timing, duration, frequency, and phasing. Originates test set-ups to isolate malfunctions and check performance characteristics of special or unique test panels or mockups. Experience in interpreting and applying a variety of technical electronic information such as schematic symbols, mathematical expressions and formulas, calibration procedures, and other reference materials. Experience in applying established techniques and methods of repair, testing, alignment, and calibration of equipment, which serves as test equipment or precision measurement standards. Experience in utilizing electronic circuits to measure electronic or electrical quantities to determine the performance characteristics and accuracy of other instruments and equipment. PHYSICAL EFFORT: Work is performed in tiring or uncomfortable positions for long periods, requiring frequent bending, reaching, stretching, climbing, and crouching. Works in cramped or awkward positions, on top of and under equipment. Performs strenuous work while standing, lying, or sitting. Frequently lifts and handles items weighing up to 40 pounds, or occasionally heavier items, with the assistance of other workers. Work requires sitting for extended periods of time, and frequent standing, walking, bending, reaching, and stooping. May work from ladders and platforms, at varying heights. WORKING CONDITIONS: Work is normally performed in well lighted, humidity and temperature controlled shops. There are dangers from high voltage electrical shock, RF energy, radiation exposure and contamination, burns from soldering irons, high-pressure air and high-pressure hydraulics. Frequently exposed to the possibility of cuts, burns, or bruises, and sprains while repairing, positioning, and moving equipment. May use safety equipment for extended periods such as protective ear devices, eye protection, hard hats, hard-toe shoes, respirators, and protective clothing. MILITARY TECHNICIAN COMPATIBILITY POSITION: Prior to placement in this position, the selected applicant must be assigned to an appropriate military position and must meet the definition of a dual status technician in accordance with 32 U S C 709. CONDITIONS OF EMPLOYMENT & NOTES: 1. Must be able to obtain and maintain the appropriate security clearance of the position. 2. This position is covered by the Domestic Violence Misdemeanor Amendment (30 Sep 96) of the Gun Control Act (Lautenberg Amendment) of 1968. An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position. 3. Ability to establish effective professional working relationships with coworkers and customers, contributing to a cooperative working environment and successful accomplishment of the mission. 4. May occasionally be required to work other than normal duty hours; overtime may be required. 5. The duties and responsibilities of your job may significantly impact the environment. You are responsible to maintain awareness of your environmental responsibilities as dictated by legal and regulatory requirements, your organization, and its changing mission. NOTES TO CANDIDATES: a. Situations of inversion of military rank are not permitted, i.e., a military technician may not be militarily senior to his or her full-time supervisor. b. Authorization for payment of PCS expenses will be granted only after determination is made that payment is in the best interest of the Hawaii National Guard. c. In addition to your application, documents of last performance appraisal, past civilian performance, letter of recommendations, and or military performance may be submitted. d. Candidates may be screened and evaluated on military attributes directly related to the compatible military position required to be assigned into, such as, but not limited to, military bearing, leadership, or ability to work with others (teamwork) in a military environment. e. Include any volunteer work experience in your resume. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional, philanthropic, religious, spiritual, community, student, social). f. Final selection will be based upon qualifications, suitability, and available manpower resources. g. This employer will provide the Social Security Administration (SSA) and if necessary, the Department of Homeland Security (DHS) with information from each new employee's Form I-9 to confirm work authorization. h. Financial Suitability - It is the policy of the government not to deny employment simply because an individual has been unemployed or has had financial difficulties that have arisen through no fault of the individual. Information about an individual's employment experience will be used only to determine the person's qualifications and to assess his or her relative level of knowledge, skills, and abilities. Although an individual's personal conduct may be relevant in any employment decision, including conduct during periods of unemployment or evidence of dishonesty in handling financial matters, financial difficulty that has arisen through no fault of the individual will generally not itself be the basis of an unfavorable suitability or fitness determination. i. Eligibles on this list will be given automatic consideration for position vacancies occurring during the six months period following the close of this announcement. j. This position may involve arduous/hazardous duties. Placement is contingent upon successful completion of a medical examination or review/approval of a physical examination taken within six months. k. Selectee may be scheduled for formal training at the Professional Education Center (PEC) within the first six months of employment. Unless there are extenuating circumstances, failure to complete National Guard Bureau prescribed courses at PEC within the first year of employment, may be cause for reassignment to other full-time positions or termination of employment.

Contacts

• Address HI CSMS 1 91-1227 Enterprise Avenue Kapolei, HI 96707 US
• Name: Charlene Pasion
• Phone: (808) 672-1224
• Email: [email protected]