Click on "Learn more about this agency" button below to view Eligibilities being considered and other IMPORTANT information. The primary purpose of this position, AIRCRAFT MECHANIC, WG-8852-11, is to serve as a crew chief and technical authority, having custody of anassigned aircraft. with primary responsibility for performing, coordinating, and/or overseeing the maintenance and periodic inspections to the assigned aircraft. Duty Title: Aircraft Mechanic

Duties

Serve as crew chief of assigned aircraft, responsible for performing, coordinating, and/or overseeing maintenance on the aircraft. Perform aircraft inspections including preflight, postflight, phase, and other scheduled and unscheduled inspections. Diagnose and identify probable locations of malfunctions from the cockpit during engine run-up. Initiate requests for unscheduled tools, equipment, and materials during preparation for flight. Utilize safety practices and procedures following established safety rules and regulations and maintains a safe and clean work area.

Requirements

• U.S. Citizenship Required
• Males must be registered for Selective Service, see www.sss.gov
• The position is subject to provisions of the DoD Priority Placement Program
• Disclosure of Political Appointments
• Relocation costs or other incentives may be available and considered by the organization.
• This position may require travel.
• This position may require drug testing and the candidate may be subject to passing a drug test upon selection.
• Selectee is expected to be granted with and/or maintain the appropriate security clearance required for the position.
• Selectee may be required to serve a probationary or trial period.
• PHYSICAL: THIS POSITION REQUIRES A PRE-EMPLOYMENT PHYSICAL.
• May be required to work overtime, rotating shifts, uncommon tours, weekends, etc.
• The work may require the employee to drive a motor vehicle. An appropriate, valid driver's license may be required.

Qualifications

In order to qualify, you must meet the quality level of experience requirements described in the Office of Personnel Management (OPM) Qualification Standards Handbook X-118C. QUALIFICATIONS: Applicants will be rated in accordance with the OPM Qualification Standard Handbook X-118C for the WG-8800 Aircraft Overhaul Family.. Although a specific length of time and experience is not required for most blue-collar positions, you must meet any screen-out element listed, and show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on the quality of experience, not necessarily the length of time. The screen out element for this position is Ability to Do The Work of The Position Without More Than Normal Supervision. JOB ELEMENTS: Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas: Knowledge of Equipment Assembly, Installation, Repair, Etc. Technical Practices (theoretical, precise, artistic) Use of Measuring Instruments Ability to Interpret Instructions, Specification, etc. (includes blueprint reading) Ability to Use and Maintain Tools and Equipment Trouble shooting PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week. VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience. PHYSICAL DEMANDS: The work requires moderate to strenuous effort. Must climb, bend, stoop, crawl, and stand for prolonged periods on concrete or metal surfaces. Frequently lifts parts and equipment weighing up to 20 pounds. Occasionally may lift and carry items that weigh about 50 pounds with mechanical lifting devices or with assistance from other workers. WORKING CONDITIONS: Work is performed in hanger areas, outdoors, in parked aircraft, and sometimes in hazardous noise areas. Exposed to extremes in heat, cold, and inclement weather. Must work in confined areas and in awkward positions. Exposed to dirt, grease, and aircraft fluids, oil, hydraulic fluid, solvents, and hazardous fluids and gases such as Hydrazine and Halon. Subject to cuts, bruises, muscle strain, and injury from falls off scaffolds, ladders, and aircraft surfaces. May be exposed to intake suction and hot exhaust blast.

Education

This job does not have an education qualification requirement.

Contacts

• Address Hill AFB 7437 6th Street Bldg 430, Rm 119 Hill AFB, UT 84056 US
• Name: Hill AFB DP2YHM
• Phone: (801) 586-4683
• Email: [email protected]