This position is part of the Defense Microelectronics Activity and is located in the Security and Facilities Engineering Branch, serving as the Environmental, Health, and Safety (EH&S) Program Manager.

Duties

As an Interdisciplinary at the NH-0690/0803/0896-3 some of your typical work assignments may include: Executes DMEA Environmental Health and Safety (EH&S) Program under the technical coordination of the DMEA EH&S Manager. Serves as a EH&S technical staff member monitoring of all aspects of DMEA EH&S Program including: environmental compliance (e.g. hazardous materials management; hazardous waste management; air, storm water and waste water discharge plans and permits; compliance inspections); industrial hygiene and occupational health; general safety; radiation safety, foundry and lab process development reviews/enhancement where hazardous materials are used; engineering controls development and review, emergency egress and notification systems; and incident management planning and response. Helps assure compliance with the governing public laws, County, Local, State, and Federal law and regulations. Implements, monitors, and reports on the execution of the DMEA EH&S program. Initiates appropriate changes in response to program changes, regulatory changes, and/or local guidance based upon continuous observation and analysis of EH&S functions to insure the successful and efficient accomplishment of the regulatory and compliance mission.

Requirements

• Must be a U.S. Citizen
• Selective Service requirements apply. Please visit http://www.sss.gov for more information
• Suitable for Federal employment determined by required background investigation
• Must obtain/maintain Non-Critical Secret Level security clearance
• Drug Testing Designated position: Yes
• May be required to successfully complete a probationary period
• Financial Disclosure: Not Required
• Fair Labor Standards Act (FLSA): Exempt
• This position is identified as Mission Essential. (please see additional information below)
• Incumbent may be subject to an uncommon tour of duty (e.g., evenings, weekends) in connection with stated duties.
• This position is telework eligible
• Incentives may be offered if determined in the best interests of the government.

Qualifications

You may qualify at the NH-03, if you fulfill the following qualifications: A. One year of specialized experience equivalent to the NH-2 (GS-11) grade level in the Federal service as listed below: Supporting policy and program objectives, appraising programs, and/or providing consultative services to management and technical personnel on a wide variety of Environmental, Health, and Safety programs; Managing Environmental, Health, and Safety programs for a major facility or region when the program covers large, complex industrial operations or experimental work involving a wide variety of new chemical agents or hazardous chemical, bacteriological, or radiological agents; Anticipating and controlling hazardous conditions, exposures, and practices; and Consulting with management on operating budgets and requirements for staff, facilities, and/or equipment, Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience. In addition to meeting qualifications, your application package must reflect the applicable experience to meet the Individual Occupational Requirements for the 0690/0803/0896, series as listed below: Basic Requirement for Industrial Hygiene Series 0690: A. A bachelor's or graduate/higher level degree in industrial hygiene, occupational health sciences, occupational and environmental health, toxicology, safety sciences, or related science; or B. A bachelor's degree in a branch of engineering, physical science, or life science that included 12 semester hours in chemistry, including organic chemistry, and 18 additional semester hours of courses in any combination of chemistry, physics, engineering, health physics, environmental health, biostatistics, biology, physiology, toxicology, epidemiology, or industrial hygiene; or C. Certification from the American Board of Industrial Hygiene(ABIH). Basic Requirement for Engineering Series 0803/0896: For 0803/0896 Engineering Series: A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico. 3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A. 4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive.) **NOTE: Failure to provide transcripts will result in you being rated ineligible for this position.

Education

Substitution of education may not be used in lieu of specialized experience for this grade level.

ARE YOU USING YOUR EDUCATION TO QUALIFY? You MUST provide transcripts or other documentation to support your educational claims.

All materials must be submitted by the closing date of the announcement.

GRADUATE EDUCATION: One academic year of graduate education is considered to be the number of credits hours that your graduate school has determined to represent one academic year of full-time study. Such study may have been performed on a full-time or part-time basis. If you cannot obtain your graduate school's definition of one year of graduate study, 18 semester hours (or 27 quarter hours) should be considered as satisfying the requirement for one year of full-time graduate study.

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show that the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://www2.ed.gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.html

**NOTE: Failure to provide transcripts will result in you being rated ineligible for this position.

Contacts

• Address Defense Microelectronics Activity 4234 54th Street McClellan, CA 95652 US
• Name: DMEA Servicing Team
• Phone: 614-692-2063
• Email: [email protected]